Elevated Support

TL7 elevated support 30 – 60 mm Joint 3 mm

The TL7 elevated support is height adjusted using an adjustment ring. Where necessary, fine leveling
and slope compensation is performed using the TL3 1 mm shims. Edge solution integrated!

Item no.	Height	Joint	Pcs./packing unit
TL7	30 - 60 mm	3 mm	48

TL8 elevated support 60 – 150 mm Joint 3 mm

The TL8 elevated support is height adjusted using an adjustment ring. Where necessary, fine leveling
and slope compensation is performed using the TL3 1 mm shims. Edge solution integrated!

Item no.	Height	Joint	Pcs./packing unit
TL8	60 - 150 mm	3 mm	48

TL8-K Coupler 90 mm

The Terra Level 90 mm couplers can be combined with TL8. Unscrew the TL8 base plate and insert
the coupler. This provides a structure height of 150 mm to 240 mm. Up to 8 couplers can be locked
on top of one another, and thus heights from 150 mm to 870 mm can be realised.

Item no.	Height	Pcs./packing unit
TL8K	90 mm	32

unscrew
lock
screw in

TL4 elevated support 60 – 130 mm Joint 3 mm

TL4 slab supports 60 mm to 130 mm are height adjusted using an adjustment ring. Where necessary,
fine leveling and slope compensation is performed with the TL3 1 mm shims. For structure heights just
above 130 mm, it is also possible to build up with TL1 10 mm slab supports. Edge solution integrated

Item no.	Height	Joint	Pcs./packing unit
TL4	60 - 130 mm	3 mm	48

TL4-K Coupler 70 mm

The TL4K coupler 70 mm can only be used in conjunction with TL4 – Unscrew TL4 base plate and
insert coupler. The height adjustment of 70 mm can be adjusted using the central adjustment ring.
This allows for a structure height of 130 mm to 200 mm. Several couplers (max. 10) can also be used
– max. installation height 830 mm.

Item no.	Height	Pcs./packing unit
TL4-K	70 mm	100