Aluminum rails system

TLAP25 Blank, TLAP25 Anodised

Terra Level Alu Profile 25 is designed to ensure easy installation with high load capacity. Screw channels and precision-fit guides for all connectors allow maximum screwing comfort.

Item no.	Height	Length	Pcs./pallet
TLAP25B	25 mm	2400 mm	72
TLAP25E	25 mm	2400 mm	72

TLAP48 Blank, TLAP48 Anodised

Terra Level Alu Profile 48 is designed to ensure easy installation with high load capacity. Screw channels and precision-fit guides for all connectors allow maximum screwing comfort.

Item no.	Height	Length	Pcs./packing unit
TLAP48B	48 mm	2400 mm	72
TLAP48E	48 mm	2400 mm	72

TLAP25 Blank
TLAP48 Blank

TLQV Terra Level lateral connector

The Terra Level lateral connectors are needed for corner joints and cross braces. The screw hole
automatically guides the screw into the screw channel of the aluminium profile. The connector fits
snugly in the aluminium profile and cannot slip.

Item no.	Pcs./packing unit
TLQV	10 x 25 pcs.

TLLV Terra Level longitudinal connector

The Terra Level longitudinal connectors are needed for extensions of the aluminium profile or for the
shoring of leftover pieces of the profile. The screw hole automatically guides the screw into the screw
channel of the aluminium profile. The connector fits snugly in the aluminium profile and cannot slip.

Item no.	Pcs./packing unit
TLLV	10 x 25 pcs.

TLVV Terra Level vertical connector

Terra Level vertical connectors are needed for treads or facing. The screw hole automatically guides
the screw into the screw channel of the aluminium profile. The connector fits snugly in the aluminium
profile and cannot slip.

Item no.	Pcs./packing unit
TLVV	10 x 25 pcs.

TLQV Terra Level lateral connector
TLLV Terra Level longitudinal connector
TLVV Terra Level vertical connector

TLPS15 Terra Level profile screw 15 mm

The Terra Level profile screw has been precisely adapted to the aluminium profile screw channel and
enables easy screwing without pre-drilling or drill screws. This means that no aluminium chips, which
can damage the seal, are produced during screwing.

Item no.	Length	Pcs./packing unit
TLPS15	15 mm	25 x 100 Pcs.

TLPA3 Terra Level profile support 3 mm height, 3 mm joint

The Terra Level profile supports are made of impact sound absorbing plastic and are anchored in the
profile without additional fastening 1 . The patio slabs are decoupled from the profile by the 3 mm
high support so that water can drain unhindered 2 . Special openings in the support allow for an adhesive connection between the aluminium profile and patio slabs, which means that the Terra Level
aluminium profile system dispenses with any visible clamps and braces 3 !

Item no.	Height	Pcs./packing unit
TLPA3	3 MM	100

TLPAP1 Terra Level profile support plate 1 mm height

The Terra Level profile support plates are used to lay e.g.natural stone slabs with different slab thicknesses. Special centring holes prevent individual plates from falling out 4 .

Item no.	Height	Pcs./packing unit
TLPAP1	1 mm	100

TL2K Terra Level MS adhesive black

Terra Level special adhesive is used to fix edge slabs and faceplates. The profile support has specially
designed openings to ensure effective bonding between the aluminium profile and patio slabs. As
a result, the Terra Level aluminium profile system does without any visible clamps and braces! The
special adhesive retains its elastic properties to compensate for thermal expansion between the patio
slabs and the aluminium profile.

Item no.	Pcs./packing unit
TL2K	12

TL2KMS Terra Level 2K mixing tip

Item no.	Pcs./packing unit
TL2KMS	5

TLAW Terra Level finishing bracket 15 x 15 mm leg,2000 mm length

Faceplates can be easily installed using the Terra Level finishing bracket. The bracket is glued to the
underside of the slabs. The slab is then inserted into the receptacle provided for this purpose on the
base plate of the pedestal bearing and glued to the previously fixed finishing bracket. This means that
the fascia slabs can be implemented entirely without visible clasps.

Item no.	Dimension	Thickness	Length	Pcs./packing unit
TLAW	15 x 15 mm	1,5 mm	2000 mm	10

TL1 Slab support 10 mm

Terra Level slab support 10 mm can be used for low structure heights.
The total structure height of slab support + aluminium profile + profile support = 38 mm.
The TL1 supports can be stacked in centimetre increments up to the desired structure height.

Item no.	Height	Pcs./packing unit
TL1	10 mm	100

TL13 Alu-Klip rigid elevated support 30 - 60 mm

The Alu-Klip rigid elevated supports are height adjusted using an adjustment ring. The Terra Level
aluminium profile snaps into the holder and does not need to be additionally fastened. Each elevated
support has a receptacle for fascia plates on the base plate.

Item no.	Height	Pcs./packing unit
TL13	30 - 60 mm	48

TL14 Alu-Klip rigid elevated support 60 - 150 mm

Item no.	Height	Pcs./packing unit
TL14	60 - 150 mm	48

TL17 Alu-Klip self-leveling elevated support 30 - 60 mm

The Alu-Klip self-leveling elevated supports are height adjusted using an adjustment ring. The Terra
Level aluminium profile snaps into the holder and does not need to be additionally fastened. Each
elevated support has a receptacle for fascia plates on the base plate.

Item no.	Height	Pcs./packing unit
TL17	30 - 60 mm	48

TL18 Alu-Klip self-leveling elevated support 60 - 150 mm

Item no.	Height	Pcs./packing unit
TL18	60 - 150 mm	48

Alu-Klip holder
receptacle for fascia plates

TL8K Coupler 90 mm

The Terra Level 90 mm coupler can be combined with TL14 and TL18. Unscrew the TL14/TL18 base
plate and insert the coupler. This provides a structure height of 150 mm to 240 mm. Up to 8 couplers
can be locked on top of one another, and thus heights from 150 mm to 870 mm can be realised.

Item no.	Height	Pcs./packing unit
TL8K	90 mm	32

unscrew
lock
screw in