Cross Joints
FK3/FK5 joint cross 3 mm/5 mm
The 3 mm/5 mm joint crosses enable an exact joint pattern. In addition to cross joint installation, the
predetermined breaking point on the leg also enables installation with a T-joint.
| Item no. | Height | Joint | Pcs./packing unit |
|---|---|---|---|
| FK3 | 15 mm | 3 mm | 60 x 50 Pcs. |
| FK5 | 15 mm | 5 mm | 60 x 50 pcs. |
SFK special joint cross 3 mm
The special joint cross enables an exact joint pattern. The wings prevent the cross from lifting. In addition to cross joint installation, the predetermined breaking point on the leg also enables installation
with a T-joint.
| Item no. | Height | Joint | Pcs./packing unit |
|---|---|---|---|
| SFK0003 | 10 mm | 3 mm | 10 x 200 pcs. |
FKT3/FKT5 joint cross with plate 3 mm/5 mm transparent
The 3 mm/5 mm joint crosses enable an exact joint pattern. In addition to cross joint installation, the
predetermined breaking point on the leg also enables installation with a T-joint.
| Item no. | Height | Joint | Pcs./packing unit |
|---|---|---|---|
| FKT3 | 10 mm | 3 mm | 60 x 50 pcs. |
| FKT5 | 10 mm | 5 mm | 60 x 50 pcs. |
DVP crushed stone support Joint 3 mm
Due to the large diameter of 200 mm, the DVP crushed stone supports are ideally suited for gravel
bed installation. This prevents individual slab corners from settling as quickly. Where necessary, TL3
1 mm shims can be used to retrospectively level the surface.
| Item no. | Height | Joint | Pcs./packing unit |
|---|---|---|---|
| DVP | 4 mm | 3 mm | 100 |
